3-in-1 Algaecide, Bactericide & Fungicide Proven To Reduce Botrytis, Powdery Mildew, Xanthomonas & More!
ZeroTol 2.0 uses a combination of Hydrogen Peroxide and Peroxyacetic Acid to prevent, suppress and control a wide range of pathogens on plants and in the soil. It works equally well to treat and control bacteria, fungi and algae on hard surfaces and equipment. This is especially useful to contain the spread of disease in your growing area. When used as directed, there will be no strong odor, visible residue or harmful effects on plants.
Suggested Uses: Apply as a broad-spectrum bactericide, fungicide and algaecide on hard, non-porous surfaces such as greenhouse structures, tools, benches, plastic, walkways, watering systems, evaporative coolers, storage rooms, ventilation equipment, floors and other equipment. ZeroTol can be used on plants grown indoors or outdoors, including bedding and flowering plants, roses, poinsettias, ornamentals, nursery stock, trees, turf, synthetic/artificial turf, cut flowers, bulbs, cuttings, seedlings, seeds and seedbeds. For use as a foliar spray, in irrigation and fogging applications, as a soil drench, seed treatment, in hydroponics or as a pre-plant dip.
Product Notes:
- When using this product as a seed treatment, please ensure that treated seeds are not accessible to birds as ZeroTol is toxic to them.
- This product is corrosive and a strong oxidizing agent. Do not use in undiluted form and mix only with water in accordance with label directions. Never bring undiluted product in contact with other pesticides, cleaners or oxidating agents.
- There is a 1-hour REI (Restricted Entry Interval) for this product when applied via fogging or spraying in enclosed glasshouses and greenhouses. There is a 0-hour REI when applied in a non-spraying method (pre-plant dip, seed treatment, soil drench, mop, soak, rinse, etc.). In field applications, entry should be restricted until sprays have dried.
- Testing for phytotoxicity and compatibility is recommended before widespread use on plants or mixing with other products.
Shop all BioSafe Systems products here.
This Product Controls These Pests or Diseases: Use to treat/control the following plant pathogens: Alternaria, Anthracnose, Aphanomyces, Black Spot, Botrytis (Grey Mold), Downy Mildew, Erwinia, Fusarium (Root Rot), Leaf Spot, Phytophthera (Blights, Rots), Plasmopara, Powdery Mildew, Pseudomonas, Pythium, Rhizoctonia, Rust, Scab, Smut, Thielaviopsis, Uncinula (Powdery Mildew), Xanthomonas, Wilts & Blights, Ralstonia solanacearum (Brown Rot, Bacterial Wilts), Sclerotinia sclerotiorum (White Mold) and Tobacco Mosaic virus. Will also suppress/control bacteria, fungi and slime-forming algae on hard surfaces and equipment.
For best results, use ZeroTol 2.0 with water containing low levels of organic or inorganic materials and having a neutral pH (pH of 7.0). In order to increase the effectiveness on plants with waxy or hairy surfaces, an additional surfactant may be needed. Only use a non-ionic surfactant with ZeroTol 2.0. May react with residues of metal-based fungicides or supplements. Do not apply ZeroTol 2.0 as a foliar spray immediately following foliar applications of metal-based products - allow at least 24 hours. Use spray solution the same day it is prepared, do not store and reuse mixed spray solution. Please refer to the manufacturer's label under the DOCS tab for more detailed information on specific plants/surfaces and treatments.
Foliar Plant Sprays: Works immediately on contact with plant surfaces.
Curative Application Rates –
- For best results, apply at first sign of disease. Spray diseased plants using a dilution rate between 1:100-1:400 (or 1-4 gals/100 gals water). Ensure adequate coverage of upper and lower foliage, stems, branches and stalks.
- Under heavy disease pressure, or when conditions are favorable for rapid disease development, apply at a 3-5 day interval until control is achieved and then follow directions for preventative treatment. Concentrations up to 1:40 can be used as a rescue treatment on berries (excluding strawberries), citrus crops, cucurbit crops and fruiting vegetables after testing to ensure the rate is safe on plants. Do not apply 1:40 rate while crops are in bloom. Always test for phytotoxicity by spraying on a few plants before using on a larger scale.
- Apply 50-500 gallons of spray solution per treated acre or 11.5-115 gals/10,000 sq ft.
- Begin applications early when plants are small. Use a rate of 1:200-1:400 (or 32-64 fl oz/100 gals water). Ensure adequate coverage of upper and lower foliage, stems, branches and stalks.
- Maintain a 5-10 day spray schedule.
- Apply 50-500 gallons of spray solution per treated acre or 11.5-115 gals/10,000 sq ft.
- Use a dilution of 1:100-1:500 (or 12.8-64 fl oz/50 gals water) on potting soil and growing mediums prior to planting.
- Use a rate of 1:200-1:500 when plants are present.
- Apply to soil or growing media to the point of saturation every 5-7 days.
- Wait 15 minutes before planting or watering.
- Use a dilution rate of 1:100 (or 1¼ fl oz/gal water) on pre-cleaned surfaces. Use a rate of 1:50 (or 2½ fl oz/gal water) if surfaces have not been cleaned with water to remove organic deposits. Additional surfactant may be used.
- Apply solution with mop, sponge, power sprayer or fogger to thoroughly wet all surfaces.
- Scrub off heavy growths of algae and fungi following application. Use a solution of ZeroTol 2.0 to wash away dead growth.
- Reapply as often as needed.
Storage: Do not contaminate water, food or feed by storage or disposal. Store in original container in a cool, dry well-vented area, away from direct sunlight. Do not allow product to become overheated in storage. Do not store in a manner where cross-contamination with other pesticides or fertilizer could occur.
Free Shipping in the contiguous 48 United States. Ships via Ground methods ONLY.
All sales are final. There are no returns of this product.
Shipping Restrictions: Ground Only.
Due to shipping constraints, product cannot ship to HI and AK. See ZeroTol HC for an expedited option.
Warning & Toxicities: HAZARDS TO HUMANS AND DOMESTIC ANIMALS. CORROSIVE: Causes irreversible eye damage. Harmful if absorbed through skin. Causes skin burns. May be fatal if swallowed. Harmful if inhaled. Do not get in eye, on skin or on clothing. Wear protective eyewear (goggles or face shield) and rubber gloves. Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco or using the toilet. Remove and wash contaminated clothing before reuse.
Environmental Hazards: For terrestrial uses only. This pesticide is toxic to birds who eat treated seed exposed on soil surface; it may also be hazardous to other wildlife, fish and aquatic invertebrates. Cover or collect seeds spilled during loading. Do not apply directly to water, or to areas where surface water is present or to intertidal areas below the mean high water mark. Do not contaminate water when disposing of equipment washwaters or rinsate. Do not apply directly to treated, finished drinking water reservoirs or drinking water receptacles when the water is intended for human consumption.
Active Ingredients/Guaranteed Analysis:
27.1%..........Hydrogen Peroxide
2.0%............Peroxyacetic Acid
70.9%..........Other Ingredients
SUGGESTED PRODUCTS:
-
$42.99–$154.76 -
$7.95–$129.95 -
$15.82–$5,106.00 -
$230.00 -
$260.00–$410.00 -
$7.95–$129.95
-
$42.99–$154.76
